A: Adjustable tuyere can adjust the opening size of the tuyere properly. Blinds mainly adjust the wind direction. Generally the size of the room is different. It is recommended to use only adjustable tuyere, followed by the visual problem, to see the customer's requirements.
A: It is generally recommended that the two pipes be between 20-50cm. What is the special situation (what is the special case)? Can be lengthened appropriately, but minimize hose discounts, because one is that the inner wall of the hose is not smooth, and the other is that the hose is easy to wrinkle when it is long, which will increase wind resistance in the pipeline and affect the overall air volume. Exceeding 1M will affect more than 10% of the total air volume.
A: When installed on the floor, it is easy for the customer to fall into the store while cleaning. The two are the same in effect. Generally, the customer is recommended to install on the wall.
A: Not necessarily, depending on the circumstances, it is generally recommended to install in the bathroom kitchen. The fixed suspending wire and pull-explosion are the same as the expansion screw principle. The main body has hoisting holes. The lifting hole must be shimmed up and down. When horizontally tightening the upper and lower nuts, it is recommended that customers add a shock-absorbing pad. The inspection port is generally left in the 450*450 size of the wiring side.
A: If so, what effect does the effect have? If not, why? If there is no matching hose, it can be large. If the interface is well sealed, it will have no effect, but it cannot be small, it will increase the difficulty of linking, and the air resistance will increase.
A: It is generally recommended not to have too many air outlets. The air volume can be reached. The air outlet of 75 is about 15 square meters, and the air outlet of 100 is about 30 square meters.
A: No, the air is flowing. The space for circulation needs to be designed to meet the air volume requirement.
A: After installation, adjust the air volume of each air outlet, adjust the opening degree of the upper air supply, and adjust the air volume control valve to ensure that the system does not leak air.